Kubota BX24 Workshop Manual page 174

BX24, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM
Swashplate and Trust Roller Bearing
1. Remove the cir-clip (6) from the pump shaft (3) and the motor
shaft (1).
2. Remove the thrust bearing (2).
3. Remove the swashplate (5) and the thrust roller bearing (4).
(When reassembling)
• Apply clean transmission oil to the crandle bearing and the
trunnion arm.
• Hold the slot guide with a minus screw driver.
• Apply clean transmission oil to the thrust roller bearing.
(1) Motor Shaft
(2) Thrust Roller Bearing
(3) Pump Shaft
(4) Thrust Roller Bearing
2-S27
TRANSAXLE
(5) Swashplate
(6) Cir-Clip
(7) Slot Guide
(8) Cradle Bearing
W1088366
KiSC issued 08, 2019 A