Lubricants; Maintenance Check List; Check And Maintenance; Check Points Of Each Use Or Daily - Kubota BX24 Workshop Manual

BX24, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM

[3] LUBRICANTS

To prevent serious damage to hydraulic system, use only specified fluid or its equivalent.
Place
Transmission Case
Grease fitting
NOTE

• * KUBOTA SUPER UDT Fluid.................KUBOTA original transmission hydraulic fluid

[4] MAINTENANCE CHECK LIST

To keep the machine working in good condition as well as to avoid any accident and trouble, carry out periodic
inspection and maintenance. Check the following points before use.
Service Internal
Daily (Each use)
Every 10 hours

[5] CHECK AND MAINTENANCE

CAUTION
• When checking and repairing, park the tractor on flat ground and apply the parking brake.
• When checking and repairing, lower the bucket and stop the engine.

(1) Check Points of Each Use or Daily

Capacities
11.6 L
3.1 U.S.gals
2.6 lmp.gals
Until grease overflows
Check the transmission fluid level
Check the hydraulic hoses
Grease all grease fitting
Lubricate joints of control lever linkage
Checking Transmission Fluid Level
1. Check the oil level at the dipstick (1).
2. If the level is too low, add new oil to the prescribed level at the oil
inlet.
IMPORTANT

• If oil level is low, do not run engine.
(1) Dipstick
Checking Hydraulic Hoses
1. Checking all hydraulic hoses for cuts or wear.
2. If defects are found, replace them.
(1) Hydraulic Hose
(2) Cardboard
8-S2
KUBOTA SUPER UDT Fluid *
Moly Ep Type grease
Check Points
A : Oil level is acceptable within this
(3) Magnifying Glass
FRONT LOADER
Lubricants
W1010650
Reference
Page
8-S2
8-S2
8-S3
8-S3
W1010764
range.
W1010960
W1011064
KiSC issued 08, 2019 A