Kubota BX24 Workshop Manual page 182

BX24, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM
66T Final Gear
1. Remove the bearing (2) with a puller.
2. Remove the bearing (4) with a puller.
3. Remove the differential lock shifter (5) and 66T final gear (6).
4. Put parting marks on the differential pinions (12), (16) and the
differential side gears (9), (14).
5. Tap out the differential pinion shaft (8).
6. Remove the differential pinions (12), (16), the differential pinion
washers (13), (16), differential side gears (9), (14) and the
differential side gear washers (10), (15).
(When reassembling)
• Install the differential pinion and differential gear, aligning the
parting marks.
• Lock the differential pinion shaft (8) by setting the key (11).
66T final gear mounting
Tightening torque
bolt
(1) 66T Final Gear
(2) Bearing
(3) Differential Lock Shift Folk
(4) Bearing
(5) Differential Lock Shifter
(6) 66T Final Gear
(7) Differential Case
(8) Differential Pinion Shaft
(9) Differential Side Gear
2-S35
TRANSAXLE
60.8 to 70.6 N·m
6.2 to 7.2 kgf·m
44.8 to 52.1 ft-lbs
(10) Differential Side Gear Washer
(11) Key
(12) Differential Pinion
(13) Differential Pinion Washer
(14) Differential Side Gear
(15) Differential Side Gear Washer
(16) Differential Pinion
(17) Differential Pinion Washer
W1091475
KiSC issued 08, 2019 A