Transaxle Shafts - Kubota BX24 Workshop Manual

BX24, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM

(3) Transaxle Shafts

Transaxle Case Front Cover

NOTE
• Before removing the transaxle case front cover (4), remove
the 4WD detent bolt (1), the detent spring (2) and the detent
ball (3) from the transaxle case front cover (4).
• Remove the cir-clip (5) from the HST pump shaft (PTO shaft)
from the HST pump shaft (5) and the HST motor shaft
securely.
1. Remove the transaxle case front cover mounting bolts (2).
2. Remove the transaxle case front cover as an unit.
(When reassembling)
• Apply liquid gasket (Three Bond 1208D or equivalent) to the joint
surface of the transaxle case to the front cover.
Transaxle case front cover
Tightening torque
mounting bolt (M8)
(1) Transaxle Case Front Cover
(2) Detent Spring
(3) Detent Ball
(4) Transaxle Case Front Cover
(5) HST Pump Shaft (PTO Shaft)
(6) Bolt
2-S30
TRANSAXLE
29 to 34 N·m
3.0 to 3.5 kgf·m
21.4 to 25.1 ft-lbs
(7) 4WD Shaft
(8) Pinion Shaft
(9) HST Motor Shaft
(10) Mid-PTO Shaft
(11) Mid-PTO Idle Gear Shaft
(12) PTO Select Shaft
W1089420
KiSC issued 08, 2019 A