Kubota BX24 Workshop Manual page 193

BX24, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM
Height of Cam Plate and Ball
1. Measure the height of the cam plate with the ball installed.
2. If the measurement is less than the allowable limit, replace the
cam plate and balls.
3. Inspect the ball holes of cam plate for uneven wear.
4. If the uneven wear is found, replace it.
Factory spec.
Height of cam plate and
ball
Allowable limit
Brake Disc and Friction Plate Wear
1. Measure the brake disc thickness and the friction plate thickness
with an outside micrometer.
2. If the thickness is less than the allowable limit, replace it.
Factory spec.
Brake disc thickness
Allowable limit
Factory spec.
Friction plate thickness
Allowable limit
2-S46
TRANSAXLE
22.89 to 22.99 mm
0.9012 to 0.9051 in.
22.40 mm
0.8819 in.
W1030769
3.3 to 3.5 mm
0.130 to 0.138 in.
3.0 mm
0.118 in.
1.92 to 2.08 mm
0.0756 to 0.0819 in.
1.52 mm
0.0598 in.
W1030890
KiSC issued 08, 2019 A