Setting Up Mower - Kubota BX24 Workshop Manual

BX24, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM

[6] SETTING UP MOWER

Assembling Mower
1. Place the mower on blocks as illustrated.
Turn the anti-scalp rollers sideways and attach to the arms of the
deck at the upper position with clevis pins and snap rings.
Remove the blocks.
2. Attach the discharge to the deck with the spring, discharge pin
and cotter pin.
Secure the spring to the discharge deflector as illustrated.
(1) Anti-scalp Roller
(2) Block
(3) Clevis Pin
(4) Snap Ring
(5) Deck
Setting Mower
CAUTION
• Park the tractor on a firm, flat and level surface, set the
parking brake, stop the engine and remove the key.
1. Start the engine and the hydraulic lever rearward to raise the
mower rear link to the highest position.
2. Stop the engine and remove the key.
3. Roll the mower under the tractor from right side.
(1) Hydraulic Control Lever
7-S8
ROTARY MOWER
(6) Discharge Pin
(7) Discharge Deflector
(8) Spring
(9) Cotter Pin
W1016757
W1016877
KiSC issued 08, 2019 A