Kubota BX24 Workshop Manual page 84

BX24, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM
Injection Timing (Continued)

NOTE
• The sealant is applied to both sides of the shims (soft metal
gasket shim). The liquid gasket is not required for
assembling.
• Shims are available in thickness of 0.20 mm (0.0079 in.), 0.25
mm (0.0098 in.) and 0.30 mm (0.0118 in.). Combine these
shims for adjustments.
• Addition or reduction of shim (0.05 mm, 0.0020 in.) delays or
advances the injection timing by approx. 0.0087 rad (0.5 °).
• In disassembling and replacing the injection pump, be sure
to use the same number of new shims with the same
thickness.
• Refer to figure of the shim to check the thickness of the
shims.
1-S18
ENGINE
W1018986
KiSC issued 08, 2019 A