Disassembling And Assembling; Bucket, Boom And Hydraulic Cylinders - Kubota BX24 Workshop Manual

BX24, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM

[2] BUCKET, BOOM AND HYDRAULIC CYLINDERS

(1) Disassembling and Assembling

Bucket and Bucket Cylinder
1. Remove the pins (4), the lower pin (1) and remove the bucket (3).
2. Disconnect the hydraulic hoses from the bucket cylinder (2).
3. Remove the upper pin (1) and remove the bucket cylinder (2).
(When reassembling)
• When installing the bucket cylinder (2), the hydraulic port should
face inside and be careful of the direction of grease fittings.
(1) Pin
(2) Bucket Cylinder
Boom Cylinder and Hydraulic Tubes
1. Disconnect the hydraulic hoses from the boom cylinders (4).
2. Remove the pins (2) and remove the boom cylinders (4).
3. Disconnect the hydraulic hoses (6) with quick couplers at the
control valve.
4. Remove the pins (1) and remove the boom (3) from the side
frame (5).
5. Remove the hydraulic tubes (7) from the boom (3).
(When reassembling)
• When installing the boom cylinders (4), the hydraulic port should
face inside and be careful of the direction of grease fittings.
(1) Pin
(2) Pin
(3) Boom
(4) Boom Cylinder
8-S12
FRONT LOADER
(3) Bucket
(4) Pin
W1016780
(5) Side Frame
(6) Hydraulic Hose
(7) Hydraulic Tube
W1016879
KiSC issued 08, 2019 A