Kubota BX24 Workshop Manual page 409

BX24, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM
Mounting Pin
1. Raise the rear wheels slightly with the boom and remove the
mounting pins (1).
2. Put the mounting pins (1) in the holes on the step of the backhoe.
3. Slowly raise the boom to disengage the backhoe from the tractor.
4. Raise the backhoe by operating the stabilizers to the lowering
direction until the mount bars (3) hit to the guide stopper (2) on
the support hooks (4).
5. Move the tractor forward from the backhoe about 200 mm (8 in.).
IMPORTANT

• Be careful not to damage or break the hoses when moving
the tractor.
6. Lower the main frame (5) and swing frame (6) onto the ground by
operating the boom and stabilizer control levers.
7. Shut off the engine and set the parking brake.
(1) Mounting Pin
(2) Guide Stopper
(3) Mount Bar
9-S9
BACKHOE
(4) Support Hook
(5) Main Frame
(6) Swing Frame
W1013187
KiSC issued 08, 2019 A