Kubota BX24 Workshop Manual page 390

BX24, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM
 Stabilizer RH (Extend)
(1) Stabilizer Cylinder RH
(2) Stabilizer RH Control Valve
(3) Bridge Passage
(4) Load Check Valve
1. When the right stabilizer control lever is pulled to the downward to set to the "EXTEND" position, the spool (5) of
the stabilizer RH control valve (2) moves to the right, which forms oil passage between bridge passage (6) and A3
port, and between B3 port and T port.
2. The pressure-fed oil from the P port opens the load check valve (3), and flows to A3 port to extend the right
stabilizer cylinder.
3. Return oil from the right stabilizer cylinder returns to the transmission case through the B3 port, low pressure
passage and T port.
(5) Spool
(6) Inlet Section
(7) Outlet Section
P : Pump Port
T : Tank Port
P.B. :Power Beyond Port
9-M9
BACKHOE
A3 : A3 Port
(To Stabilizer RH Cylinder)
B3 : B3 Port
(From Stabilizer RH
Cylinder)
a : Low Pressure
b : High Pressure
KiSC issued 08, 2019 A