BX24, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM
(2) Alternator
Magnet Switch
1. Remove the drive end frame (1) mounting screws.
2. Take out the overrunning clutch (2), ball (3), spring (4), gears (5),
rollers (6) and retainer (7).
(When reassembling)
• Apply grease to the gear teeth of the gears (5) and overrunning
clutch (2), and ball (3).
(1) Drive End Frame
(2) Overrunning Clutch
(3) Ball
(4) Spring
Plunger
1. Remove the end cover (1).
2. Take out the plunger (2).
(1) End Cover
Alternator
1. Check the battery charging voltage while engine runs.
2. Check the increasing voltage when increasing the engine
revolution.
3. If the battery charging voltage does not increase, the alternator is
faulty.
4. Replace the alternator as an assembly.
(1) Battery
6-S27
ELECTRICAL SYSTEM
(5) Gear
(6) Roller
(7) Retainer
W1016728
(2) Plunger
W1016883
W1058597
KiSC issued 08, 2019 A