Kubota BX24 Workshop Manual page 224

BX24, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM
Steering Wheel
1. Remove the steering wheel cap (1).
2. Remove the steering wheel mounting nut and remove the
steering wheel.
(When reassembling)
Steering wheel mounting
Tightening torque
nut
(1) Steering Wheel Cap
Meter Panel
1. Disconnect the main switch connector and combination switch
connector (7).
2. Remove the hand accelerator lever grip and cruise control lever
knob.
3. Disconnect the hand accelerator wire (3) and then turn the hand
accelerator lever (2) to the operator seat side.
4. Open the bonnet, remove the panel mounting screws and
dismount the meter panel.
(1) Meter panel
(2) Hand Accelerator Lever
(3) hand Accelerator Wire
(4) Cruise Control Lever
Steering Controller
1. Disconnect the power steering hoses (1), (2), (3), (4).
2. Remove the steering controller mounting screws and remove the
steering controller (5).
(When reassembling)
• Be sure to connect the power steering hoses to their original
position, and tighten them to the specified torque.
Power steering hose
Tightening torque
mounting nut
(1) Cylinder Hose RH
(2) Cylinder Hose LH
(3) Delivery Hose
(4) Return Hose
(5) Steering Controller
4-S5
STEERING
20 to 25 N·m
2.0 to 2.6 kgf·m
14.8 to 18.4 ft-lbs
W1011793
(5) Main Switch
(6) Combination Switch
(7) Connector for Combination Switch
W1011901
28.4 to 30.0 N·m
2.9 to 3.1 kgf·m
20.9 to 22.1 ft-lbs
A : Bottom View
P : Pump Port
(Connect to Delivery Hose)
T : Tank Port
(Connect to Return Hose)
L : L Port
(Connect to Cylinder LH Hose)
R : R Port
(Connect to Cylinder RH Hose)
a : Right
b : Front
W1012133
KiSC issued 08, 2019 A