Kubota BX24 Workshop Manual page 414

BX24, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM
Swing Frame
1. Disconnect the swing cylinder rods (5) from swing frame (4).
2. Remove the swing frame (4) from main frame (1).
(When reassembling)
• Lock the locking nuts to setting bolts at position where the setting
bolt may still be rotated.
• Reinstall the thrust washers (6) at their original positions.
(1) Main Frame
(2) Pin (35  98 mm)
(3) Pin (25  107 mm)
Swing Cylinder
1. Remove the swing cylinder bottom pin (3).
2. Disconnect the hydraulic hoses (1).
3. Remove the swing cylinder (2).
(1) Hydraulic Hose
(2) Swing Cylinder
Stabilizers and Stabilizer Cylinder
1. Remove the pins (1) (4) and remove the stabilizer cylinder (2)
with hydraulic hoses.
2. Remove the pin (5) and remove the stabilizer (6).
(When reassembling)
• Lock the locking nuts to setting bolts at position where the setting
bolt may still be rotated.
(1) Pin (25.4  75 mm)
(2) Stabilizer Cylinder
(3) Main Frame
9-S14
BACKHOE
W1016286
(4) Swing Frame
(5) Swing Cylinder Rod
(6) Thrust Washer
W1017110
(3) Pin (25  157 mm)
W1017745
(4) Pin (25.4  101 mm)
(5) Pin (25.4  105 mm)
(6) Stabilizer
W1017254
KiSC issued 08, 2019 A