Kubota BX24 Workshop Manual page 251

BX24, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM
Lever Grips and Fender
1. Disconnect the electric outlet connector (6).
2. Remove the lowering speed adjusting knob (5) and cutting height
adjusting dial knob (4).
3. Remove the lever grips (2).
4. Remove the fender (1) with lever guide (3).
(1) Fender
(2) Lever Grip
(3) Lever Guide
Fuel Tank
1. Drain the fuel.
2. Disconnect the lead wire from fuel level sensor and fuel hoses
from the fuel tank (1).
3. Remove the fuel tank stays (2), (3) and cushions, then remove
the fuel tank (1).
4. Remove the PTO cover (4).
(When reassembling)
Fuel tank stay mounting
Tightening torque
bolt and nut
(1) Fuel Tank
(2) Fuel Tank Stay LH
Fender Center Stay
1. Remove the fender bracket (2).
2. Remove the fender center stay (1).
(When reassembling)
Fender bracket mounting
Tightening torque
bolt
(1) Fender Center Stay
5-S9
HYDRAULIC SYSTEM
(4) Cutting Height Adjusting Dial Knob
(5) Lowering Speed Adjusting Knob
(6) Electric Outlet
W1014865
48.1 to 55.9 N·m
4.9 to 5.7 kgf·m
35.4 to 41.2 ft-lbs
(3) Fuel Tank Stay RH
(4) PTO Cover
W1027629
124 to 147 N·m
12.6 to 15.0 kgf·m
91.2 to 108 ft-lbs
(2) Fender Bracket
W1027820
KiSC issued 08, 2019 A