Kubota BX24 Workshop Manual page 420

BX24, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM
Installing O-ring and Piston Seal
1. Place the slide jig (2) on the piston (4).
2. Install the O-ring (3) on the piston using the slide jig.
3. Install the piston seal (1) over the O-ring using the slide jig.
4. Compress the piston seal to the correct size by installing the
piston into the correcting jig (5).
NOTE

• Do not turn (roll) the piston seal as you install it.
(1) Piston Seal
(2) Slide Jig
(3) O-ring
9-S20
BACKHOE
(4) Piston
(5) Correcting Jig
W1022984
KiSC issued 08, 2019 A