Kubota BX24 Workshop Manual page 180

BX24, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM
Rear Axle (LH)

NOTE
• Prepare a specially bent snap ring plier.
1. Draw out the oil seal with a screw driver.
2. Remove the internal cir-clip from the rear axle case.
3. Draw out the rear axle from the rear axle case.
(When reassembling)
• Do not damage the oil seal.
(1) Rear Axle
(2) Oil Seal
(3) Internal Cir-clip
2-S33
TRANSAXLE
(4) Ball Bearing
(5) Rear Axle Case
W1090759
KiSC issued 08, 2019 A