Range Gear Shift Section; Front Wheel Drive Section - Kubota BX24 Workshop Manual

BX24, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM

[2] RANGE GEAR SHIFT SECTION

[3] FRONT WHEEL DRIVE SECTION

Two kinds of power flow are selected by operating the
range gear shift lever to shift the 16T-24T shifter gear (4)
on the spiral bevel gear shaft (3).
 Low Range
17T Gear Shaft (2)  Shifter Gear (24T) (4)  Spiral
Bevel Pinion Shaft (3).
 High Range
25T Gear (1)  Shifter Gear (16T) (4)  Spiral Bevel
Pinion Shaft (3).
(1) 25T Gear
(2) 17T Gear
(3) Spiral Bevel Pinion Shaft
(4) 16T-24T Shifter Gear
2-wheel drive or 4-wheel drive is selected by
changing the position of 19T shifter gear (2) with the front
wheel drive lever.
 Front Wheel Drive "Disengaged"
When the front wheel drive lever is set to
"Disengaged" position, the 19T shifter gear (2) is
neutral and power is not transmitted to the front wheel
drive shaft (1).
 Front Wheel Drive "Engaged"
When the front wheel drive lever is set to "Engaged"
position, the 19T shifter gear (2) slides to the right to
engage with 13T-25T gear shaft (5).
power from spiral bevel pinion shaft (3) is transmitted to
the front wheel drive shaft (1) through the gears.
(1) Front Wheel Drive Shaft
(2) 19T Shifter Gear
(3) Spiral Bevel Pinion Shaft
(4) 12T Gear
(5) 13T-25T Gear Shaft
2-M11
TRANSAXLE
L : Low Range
H : High Range
W1014705
Therefore, the
A : Front Wheel Drive
"Engaged"
W1014843
KiSC issued 08, 2019 A