Kubota BX24 Workshop Manual page 389

BX24, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM
 Stabilizer RH (Shrink)
(1) Stabilizer Cylinder RH
(2) Stabilizer RH Control Valve
(3) Bridge Passage
(4) Load Check Valve
1. When the right stabilizer control lever is pushed to the forward to set to the "SHRINK" position, the spool (5) of the
stabilizer RH control valve (2) moves to the left, which forms oil passage between bridge passage (3) and B3 port,
and between A3 port and T port.
2. The pressure-fed oil from the P port opens the load check valve (4), and flows to B3 port to retract the right stabilizer
cylinder.
3. Return oil from the right stabilizer cylinder returns to the transmission case through the A3 port, low pressure
passage and T port.
(5) Spool
(6) Inlet Section
(7) Outlet Section
P : Pump Port
T : Tank Port
P.B. :Power Beyond Port
9-M8
BACKHOE
A3 : A3 Port
(From Stabilizer RH
Cylinder)
B3 : B3 Port
(To Stabilizer RH Cylinder)
a : Low Pressure
b : High Pressure
KiSC issued 08, 2019 A