Kubota BX24 Workshop Manual page 184

BX24, RCK54(P)-23BX, RCK60B-23BX, LA240, BT601, WSM
PTO Clutch Assembly
1. Remove the bearing (2).
2. Remove the external cir-clip and the outlet gear (3).
3. Remove the seal rings (6).
4. Remove the bearing (5).
5. Remove the external cir-clip (18) using a clutch spring
compressor.
6. Disassembling the clutch pack inner parts as show in the figure.
(When reassembling)
• Change the seal ring (6) with a new one.
(1) Pump Shaft (PTO Clutch Shaft)
(2) Bearing
(3) Clutch Gear
(4) Clutch Pack
(5) Bearing
(6) Seal Ring
(7) Clutch Case
(8) O-ring
(9) Brake Disc
2-S37
TRANSAXLE
(10) Brake Plate
(11) Clutch Piston
(12) Separate Plate
(13) Disc Plate
(14) Backing Plate
(15) Internal Cir-clip
(16) Brake Spring
(17) Washer
(18) External Cir-clip
(19) Clutch Spring Compressor
W1092125
KiSC issued 08, 2019 A