Exploded View Of Gears And Shafts Located In Front Transmission Housing - Kubota L185 Shop Manual

SHOP MANUAL
grooves facing the gears. Make certain
set screw indentation in pto shift fork
shaft and reverse idler shaft are posi-
tioned correctly. Grease lip of input
shaft oil seal before reinstalling.
Model L285
72. OVERHAUL. To disassemble
main transmission, proceed as follows:
Remove shift housing and forks.
Remove clutch release bearing, fork and
shaft, then unbolt and remove input
shaft seal retainer. Tap countershaft
(11-Fig. 101) forward and remove
cover (6) and snap ring (7). Tap shaft
rearward and withdraw gears as shaft is
removed from housing. Tap input shaft
assembly (17) forward and remove from
housing. Remove bearings and gear as
necessary. Remove retainer plate (1),
then withdraw reverse idler shaft (3)
and gear (5). Tap pto countershaft (24)
Paragraph 72
forward and remove cover (20), snap
ring and front bearing. Tap shaft rear-
ward out of housing and withdraw gears
(23) and overrunning clutch assembly
(26 through 33).
Inspect all gears and shafts for ex-
cessive wear, chipped or cracked teeth
or other damage and renew as
necessary.
To reassemble main transmission,
reverse the disassembly procedure.
Fig. 99^Exploded view of gears and shafts iocated in front transmission housing on i^odeis LI85 and L245.
1. Reverse idler shaft n ,-.,>...MTTA
2. Set screw
3. Bu.shings
4. Reverse idler gear
5. Gnver
6. Snap ring
7. Bearing
8. Thrust washer
9. Retaining ring
10. Gear{32T)
11. Spline boss
12. Retainer clip
18. Gear (4 IT)
14. Countershaft
15. (rear (45T)
16. dear (45T)
17. Bearing
18. Spacer
20. Oil seal
21. Snapping
22. Washer
23. Bearing
24. (;ear(23T)
25. Gear(17T)
2fi. Input shaft
27. Spacer
28. Snap rin^^
29. BearitiK
30. Thrust washer
31. Snap rinK
32. Cover
33. Snap Hn^
34. Bearing
35. Spacer
36. Gear(41T)
37. Pto n.un ter shaft
38. Gear (45T)
39. Retainer clip
40. Spline bn.s.s
42. Rt'taininK r>nK
48. Thrust washer
44 Hearing
45. Spacer
4r> Snap rintr
47' Snap ring
4^; Hearing
.19. (\.uplintr
r)(t l'toclutch ram-
:A' Snat. ring
r,-'' Sparer
53,' Clutch case
54_ Coupling
35