Range Gear Shift Section - Kubota B1830 Workshop Manual

B1830,B2230,B2530,B3030, WSM

6. RANGE GEAR SHIFT SECTION

Range gear shift lever (1) is located at left side
fender.
Range gear shift lever (1) can select three speed
range, low speed, mid speed and high speed.
Range gear shift lever (1) and 18T shifter gear (10)
are linked with range shift arm (3) and range shift fork (2)
etc..
Three range gear shifts are selected by shifting the
18T shifter gear (10) on the sub shaft (8) to 17T gear (6)
and 25T-31T gear (7) on 6T bevel pinion shaft (4).
Low Speed Position
Sub shaft (8) → 18T shifter gear (10) → 12T gear
(11) → 31T of 25T-31T gear (7) → 6T bevel pinion shaft
(4).
Middle Speed Position
Sub shaft (8) → 18T shifter gear (10) → 25T of
25T-31T gear (7) → 6T bevel pinion shaft (4).
High Speed Position
Sub shaft (8) → 18T shifter gear (10) → 26T gear (9)
→ 17T gear (6) → 6T bevel pinion shaft (4).
(1) Range Gear Shift Lever
(2) Range Shift Fork
(3) Range Shift Arm
(4) 6T Bevel Pinion Shaft
(5) 13T Gear (for Front Wheel
Drive)
(6) 17T Gear
(7) 25T-31T Gear
(8) Sub Shaft
3-M25
TRANSMISSION
(9) 26T Gear
(10) 18T Shifter Gear
(11) 12T Gear
L: "LOW" Range
M: "MID" Range
N: "Neutral" Position
H: "HIGH" Range
9Y1210003TRM0025US0
KiSC issued 05, 2012 A