Stratasys Objet260 User Manual page 53

Objet260 User Guide
DOC-37004 Rev. J
Therefore, when saving VRML files in a CAD program, a bmp file of the
assembly should be saved.
You can open several stl files (and VRML files) to place several models on
the build tray. If you select multiple stl files that make up an assembly, you
can select all or some of the parts. To print the entire model, select all of an
assembly's component stl files, and select the Assembly check box. This
positions the parts as a complete, integrated model instead of as
independent parts. The effects of selecting the Assembly check box—in
both the model tree and the build tray display—are shown in the following
figures.
Figure 5-8 Assembly check box selected—stl files are placed as an
assembly
Figure 5-9 Assembly check box not selected—stl files are placed as
parts
The Model Settings ribbon is displayed when objects are placed on the
build tray.
5 Using Objet Studio
5-12