Stratasys Objet260 User Manual page 213

Objet260 User Guide
6. Loosen the screw securing the UV lamp cover (A), and pull the cover up
7. Pull the UV reflector out of the print block.
8. Using a 2.5-mm hex key, remove the UV lamp clamp (2 screws).
DOC-37004 Rev. J
(B), then out (C).
Figure 6-110 Removing the UV lamp cover
Figure 6-111 Removing the UV lamp reflector
Figure 6-112 Removing the UV lamp clamp
6 Operating and Maintaining the Printer
6-77