Stratasys Objet260 User Manual page 215

Objet260 User Guide
11. U sing the polyurethane tube provided in the kit, push the new UV lamp bulb
12. T wist the tube by 180° (a), and continue to insert the UV lamp bulb into the
DOC-37004 Rev. J
into the UV reflector. Make sure that the tip on the bulb is facing the slot.
Figure 6-115 Pushing the new UV bulb into the UV reflector
UV reflector (b).
Figure 6-116 Twisting the tube and inserting the UV lamp
6 Operating and Maintaining the Printer
6-79