Stratasys Objet260 User Manual page 151

Objet260 User Guide
8. In the Flushing cycle section of the wizard screen, choose how thoroughly
There are additional settings that you can select for special purposes (see
"Advanced Settings"). If necessary, click Advanced Settings before
clicking Next.
DOC-37004 Rev. J
you want to flush out material currently in the system:
❒ Economy. This cycle can be used when replacing a light-colored model
material with a darker material (such as Agilus30 Black™ or
VeroBlack™) or if the exact color of the 3D print is unimportant. Use this
cycle when replacing cleaning fluid with any model material.
The wizard flushes the system with the minimum amount of material
needed to ensure that 3D prints have the mechanical properties of the
new material.
❒ Full. Use this cycle when the 3D print must have the exact color of the
new material. This cycle should also be used before printing with
MED610 or MED620, if any other model material is currently loaded in
the printer.
The wizard thoroughly flushes t he feed tubes and print heads needed
for printing, based on your selections in the previous screens.
6 Operating and Maintaining the Printer
6-15