Stratasys Objet260 User Manual page 189

Objet260 User Guide
Replace print heads only after consulting with an authorized Stratasys
service provider.
DOC-37004 Rev. J
The wizard uses the data collected to analyze the condition of the print
heads and optimize them so they print w ith a uniform layer of material.
❒ If the heads are in satisfactory condition, the following wizard screen
appears.
Figure 6-68 Final wizard screen, after optimizing print heads
❒ If the wizard determines that a print head is faulty—or that it is
negatively affecting part quality with the current head configuration—
you need to replace it. Indicate whether or not you want to do so now.
Figure 6-69 Defective print heads found
• Select Replace defective head(s) if you are prepared to replace
the print heads now (see below).
or—
• Select Abort wizard if you want to replace the print heads at
another time.
6 Operating and Maintaining the Printer
6-53