Stratasys Objet260 User Manual page 203

Objet260 User Guide
UV Sensor Connected to Printer
The following steps apply when using the Stratasys UV sensor box that you
connect to the printer. They do not apply when using a U V external radiation
measuring device.
1. To synchronize the wizard and the UV sensor, enter the CF number from
2. Click Next.
DOC-37004 Rev. J
the label on the back of the UV sensor box.
Figure 6-92 UV sensor synchronization
Figure 6-93 Label on the bottom of the UV sensor box
The build tray lowers.
6 Operating and Maintaining the Printer
6-67