Stratasys Objet260 User Manual page 166

Objet260 User Guide
3. Follow the instructions on the wizard screens, and select the confirmation
4. Click Next.
5. When the following screen appears, open the cover.
Warning: Hot Surface
The print head orifice plates (bottom surface) may be hot. Do not touch
them with your bare hands, and proceed with caution.
6. Place the mirror on the build tray.
7. Put on the gloves.
Caution
Uncured printing material on the print heads might cause skin irritation. Use
disposable cleaning gloves to protect your hands.
8. Soak the cleaning cloth with alcohol.
DOC-37004 Rev. J
check boxes.
Figure 6-26 Tray and cover confirmation
The printer prepares for you to clean the print heads.
Figure 6-27 Head cleaning wizard—steps 5–11
6 Operating and Maintaining the Printer
6-30