Stratasys Objet260 User Manual page 69

Objet260 User Guide
3. Select Coat With and, from the drop-down list, select the coating material.
4. In the Thickness field, enter a coating thickness between 0.3 and 3
Note: The coating thickness does not affect the external dimensions of the
object, which remain unchanged. The coating layer replaces part of the main
model material.
5. Click Apply.
Note: When you de-select objects, they are displayed, by default, with colors
representing the model-material. Even after adding a coating to an object, its
color remains that of the main material, not the color of the coating material.
To inspect, modify or remove the coating applied to an object:
1. On the Model Toolbar or the Model Settings ribbon, click
2. Perform one of the following actions—
DOC-37004 Rev. J
Figure 5-31 Coating material selected
millimeters.
The Coat with dialog box opens.
❒ Change the coating settings, and click Apply.
❒ To remove the coating, clear the Coat With check box and click Apply.
❒ To keep the current coating settings, click Apply or Cancel.
5 Using Objet Studio
.
5-28