Initializing Parameters
Initialize parameters by following the table below. Set A1-03 to 2220 when initializing a 2-wire sequence.
Step
1
2
MENU
3
4
RESET
5
6
7
8
9
-6
4
Table 4.1 Initializing Parameters
Key
Operator Screen Displays
×
3
Description
Turn ON the power.
Press to shift to Advanced Programming
Mode.
Press to show parameter reference screen.
Press to confirm A1.
Press three times to display A1-03 (initialize).
Press to show the set value for the initializing
method.
Use to change the set value to "2220."
Press to execute the initialization.
When the initializing is completed, the "End"
indication appears, and the display returns to
the parameter reference screen.