Individual Functions; Using The Timer Function - Omron SYSDRIVE RV Series User Manual

Individual Functions

This section explains the individual functions used in special applications.

Using the Timer Function

Multi-function contact input terminals S3 to S8 can be designated as timer function input terminals, and multi-
function output terminals M1-M2, P1-PC, and P2-PC can be designated as timer function output terminals. By
setting the delay time, you can erase chattering from the sensors and switches.
Set one of the parameters H1-01 to H1-06 (multi-function contact input terminal S3 to S8) to 18 (timer
•
function input).
Set H2-01 to H2-03 (multi-function output terminals M1-M2, P1-PC, and P2-PC function selection) to 12
•
(timer function output).
Related Parameters
Param-
eter
Number
Timer func-
tion ON-
delay time
b4-01
Delay-ON
Timer
Timer func-
tion OFF-
delay time
b4-02
Delay-OFF
Timer
Setting Example
When the timer function input ON time is longer than the value set in b4-01, the timer output function is
turned ON. When the timer function input OFF time is longer than the value set in b4-02, the timer output
function is turned OFF. An example of timer function operation is given in the following diagram.
Timer function input
Timer function output
-140
6
Name
Description
Display
Sets the timer function out-
put ON-delay time (dead
band) for the timer function
input, in 1-second units.
Enabled when a timer func-
tion is set in H1-
.
Sets the timer function out-
put OFF-delay time (dead
band) for the timer function
input, in 1-second units.
Enabled when a timer func-
tion is set in H1-
.
Fig 6.77 Timer Function Operation Example
Change
Setting Factory during
Range Setting Opera-
tion
0.0 to
0.0 s No
300.0
or H2-
0.0 to
0.0 s No
300.0
or H2-
Control Methods
Regis-
V/f Open Flux
ter
V/f with Loop Vec-
PG Vector tor
A A A A 1A3H
A A A A 1A4H