Omron SYSDRIVE RV Series User Manual page 520

EMC Directive
3G3RV-Series Inverters satisfy testing for conformance to the EMC Directive under the conditions described
in European Standard EN61800-3.
Installation Method
In order to ensure that the machinery or installation incorporating the Inverter conforms to the EMC Directive,
perform installation according to the method below.
Install a noise filter that conforms to European Standards on the input side. (Refer to Chapter 9
•
Noise Filters for EMC Directives).
Use a shielded line or metal piping for wiring between the Inverter and Motor. Make the wiring as short as
•
possible.
To suppress harmonics, install a DC reactor in 3G3RV-A2004-V1, A2007-V1, A4004-V1, and A4007-V1
•
models. (Refer to Chapter 9
R/L1, S/L2, T/L3
Inputs
Filter
Outputs
Wiring length:
40 cm max.
Metallic plate
Remove the paint on the ground side.
Fig 10.7 Installation Method for Filter and Inverter (3G3RV-A2004-V1 to A2185-V1, A4004-V1 to A185-V1)
AC Reactor.)
PE
Remove the paint on the ground side.
Inverter
U/T1, V/T2, W/T3
R/L1, S/L2, T/L3
Wiring length: 20 m max.
IM
Conformance to CE Markings
Input
10
17
10-