Omron SYSDRIVE RV Series User Manual page 320

Register No.
002CH
002DH
002EH - 0030H
0031H
0032H - 0037H
0038H
0039H
003AH
003BH
003CH
003DH
003EH
003FH
Note Communications error details are stored until an error reset is input (you can also reset while the Unit is operating). Communications error details can
also be read by using the register numbers given in the Register column in the U: Monitor parameter table.
-112
6
Bit B
Overtorque detection
Bit C
Frequency reference lost
Bit D Retrying error
Bit E Error (including RS-422A/485 communications time-out) 1:Error occurred
Bit F Communications time-out 1: Timed out
Multi-function output status
Bit 0 Multi-function output (terminal M1-M2) 1: ON 0: OFF
Bit 1 Multi-function output 1 (terminal P1-PC, M3-M4): 1: ON 0: OFF
Bit 2 Multi-function output 2 (terminal P1-PC, M5-M6): 1: ON 0: OFF
Bits 3 to F Not used
Not used
Main circuit DC voltage
Not used
PID feedback quantity (Input equivalent to 100%/Max. output frequency; 10/1%; without sign)
PID input quantity (±100%/±Max. output frequency; 10/1%; with sign)
PID output quantity (±100%/±Max. output frequency; 10/1%; with sign)
CPU software number
Flash software number
Communications error details
Bit 0 CRC error
Bit 1 Invalid data length
Bit 2 Not used
Bit 3 Parity error
Bit 4 Overrun error
Bit 5 Framing error
Bit 6 Time-out
Bits 7 to F Not used
kVA setting
Control method
Contents
1: Detected
1: Lost
1: Retrying