Digital Operator; Digital Operator Display - Omron SYSDRIVE RV Series User Manual

Digital Operator

This section describes the displays and functions of the Digital Operator.

Digital Operator Display

The key names and functions of the Digital Operator are described below.
Digital Operator with LED Display (3G3IV-PJVOP161)
FWD REV
DRIVE QUICK ADV VERIFY AUTO
L O C A L
REMOTE
JOG
FWD
REV
RUN
Digital Operator with LCD Display (3G3IV-PJVOP160)
FWD REV
L O C A L
REMOTE
JOG
FWD
REV
RUN
-2
3
REMOTE
SEQ REF ALARM
PRGM
TUNING
DIGITAL OPERATOR PJVOP161
MENU ESC
RESET
STOP
REMOTE
SEQ REF ALARM
DIGITAL OPERATOR PJVOP160
MENU ESC
RESET
STOP
Fig 3.1 Digital Operator Component Names and Functions
Drive Mode Indicators
FWD: Lit when there is a forward run command input.
REV: Lit when there is a reverse run command input.
SEQ: Lit when the run command from the control circuit ter-
minal is enabled.
REF: Lit when the frequency reference from control circuit
terminals A1 and A2 is enabled.
ALARM: Lit when an error or alarm has occurred.
Data Display
Displays monitor data, parameter numbers, and
settings (in five digits).
Mode Display
DRIVE: Lit in Drive Mode.
QUICK: Lit in Quick Programming Mode.
ADV: Lit in Advanced Programming Mode.
VERIFY: Lit in Verify Mode.
A. TUNE:Lit in Autotuning Mode.
Keys
Execute operations such as setting parameters,
monitoring, jogging, and autotuning.
Drive Mode Indicators
FWD: Lit when there is a forward run command input.
REV: Lit when there is a reverse run command input.
SEQ: Lit when the run command from the control circuit ter-
minal is enabled.
REF: Lit when the frequency reference from control circuit
terminals A1 and A2 is enabled.
ALARM: Lit when an error or alarm has occurred.
Data Display
Displays monitor data, parameter numbers, and
settings.
Keys
Execute operations such as setting parameters,
monitoring, jogging, and autotuning.