Installing And Wiring Option Cards; Option Card Models And Specifications - Omron SYSDRIVE RV Series User Manual

Installing and Wiring Option Cards

Option Card Models and Specifications

Up to three Option Cards can be mounted in the Inverter. You can mount up one Card into each of the three
places on the controller card (A, C, and D) shown in Fig 2.25.
Table 2.15 lists the type of Option Cards and their specifications.
PG Speed Control Cards
Speed Reference Boards
DeviceNet Communications
Card
Analog Monitor Card
* An Option Card in Mounting Location D is supported by Asian Models only. Other models do not have the CN3 connector shown in Fig 2.25.
-34
2
Table 2.15 Option Card Specifications
Card Model
3G3FV-PPGA2
3G3FV-PPGB2
3G3FV-PPGD2
3G3FV-PPGX2
3G3IV-PAI14U
3G3IV-PAI14B
3G3IV-PDI08
3G3IV-PDI16H2
3G3RV-PDRT2
3G3FV-PA008
3G3FV-PA012
Specifications
Serial open-collector/complimentary inputs
Phase A/B complimentary inputs
Single line-driver inputs
Phase A/B line-driver inputs
Input signal levels
0 to 10 V DC (20 kΩ), 1 channel
4 to 20 mA (250 Ω), 1 channel
Input resolution: 14-bit
Input signal levels
0 to 10 V DC (20 kΩ)
4 to 20 mA (250 Ω), 3 channels
Input resolution: 13-bit with sign bit
8-bit digital speed reference setting
16-bit digital speed reference setting
DeviceNet communications support
8-bit analog outputs, 2 channels
12-bit analog outputs, 2 channels
Mounting
Location
A
A
A
A
C
C
C
C
C
D
D