Switching Modes - Omron SYSDRIVE RV Series User Manual

Switching Modes

The mode selection display will appear when the MENU Key is pressed from a monitor or setting display.
Press the MENU Key from the mode selection display to switch between the modes.
Press the DATA/ENTER Key from the mode selection key to monitor data and from a monitor display to
access the setting display.
IMPORTANT
-6
3
MENU
Drive Mode
ESC
DRIVE QUICK ADV VERIFY AUTO
TUNING
Quick
MENU
Programming Mode
ESC
DRIVE QUICK ADV VERIFY AUTO
TUNING
Advanced
MENU
Programming Mode
ESC
DRIVE QUICK ADV VERIFY AUTO
TUNING
MENU
Verify Mode
ESC
DRIVE QUICK ADV VERIFY
AUTO
TUNING
If a user constant is changed
Autotuning
MENU
the number will be dislayed.
Mode
ESC
DRIVE QUICK ADV VERIFY
AUTO
TUNING
Mode Selection Displays
Lit Flashing
Fig 3.3 Mode Transitions (Example for the 3G3IV-PJVOP161)
When running the Inverter after using Digital Operator, press the MENU Key to enter the Drive Mode (DRIVE
indicator will flash) and then press the ENTER Key from the Drive Mode display to bring up the monitor dis-
play (DRIVE indicator will light). Run commands can't be received from any other display. (Monitor display in
Drive Mode will appear when the power is turned ON.)
Power ON
(Operation possible)
AUTO
DRIVE QUICK ADV VERIFY
TUNING
ESC
DRIVE QUICK ADV VERIFY AUTO
TUNING
ESC
DRIVE QUICK ADV VERIFY AUTO
TUNING
When returning from a setting
display, the rightmost digit
of the monitor display will
flash.
DRIVE QUICK ADV VERIFY AUTO
TUNING
ESC
DRIVE QUICK ADV VERIFY AUTO
TUNING
Monitor Displays
Not lit
DRIVE QUICK ADV VERIFY AUTO
TUNING
AUTO
DRIVE QUICK ADV VERIFY
TUNING
DRIVE QUICK ADV VERIFY AUTO
TUNING
Setting Displays