Powering On The System Unit; Figure 6-1 System Unit Power-On (Front Panel) - Sun Microsystems Ultra 60 Service Manual

6.1

Powering On the System Unit

To power on the system unit:
1. Turn on power to all connected peripherals.
Note – Peripheral power is activated prior to system power so the system can
recognize the peripherals when it is activated.
2. Connect the AC power cord.
3. Set the front panel power switch to the On position (
Type-5 keyboard power on key (
4. Verify the following:
a. The front panel LED is on.
b. The system fans are spinning.
FIGURE 6-1
6-2 Sun Ultra 60 Service Manual • August 2001
System Unit Power-On (Front Panel)
).
FIGURE 6-2
) or press the Sun
FIGURE 6-1