KLR 10 Installation Manual
Figure 1-5: AOA Probe Sensor Fittings
KLR 10 AOA probe
The AOA Probe is mounted on a 9 in. x 9 in. mounting plate. The mounting plate is cut to fit the existing
opening.
Figure 1-6: Mounting Plate
AOA Probe and 2 fittings = .23 lbs.
9"X9" plate + hardware = .40 lbs (Less when cut to fit existing opening)
Add .25 lbs with optional heated probe.
Two sense lines are connected to the AOA probe. The weight of sense line is .02 lbs/ft.
General
P/N D201305000058
Page 1-6
Rev 1 Jul 2013