Product Overview; Epp3504-0023 - Introduction; Fig. 3 Epp3504-0023 - Beckhoff EPP3504-0023 Short Manual

3

Product overview

Documentation status of functions
The EPP3504‑0023 devices are in continuous development, both in terms of new devices and new
software functions. As a result, settings that can be found in delivered devices, e.g. in the CoE/PDO/DC
dialogs, may not yet be documented. The use of such non-documented properties is not permitted unless it
is done with the express supervision of Beckhoff Support.
3.1

EPP3504-0023 - Introduction

Fig. 3: EPP3504-0023
4-channel measuring bridge,(SG) full/half/quarter bridge, 24 bit, 10 ksps
The EPP3504-0023 EtherCAT P Box is designed for the evaluation of measuring bridges in full-bridge, half-
bridge and quarter-bridge configuration. In addition, it supports the measuring ranges potentiometer, PT1000
(RTD) and ±10 V. It is derived from the ELM3504 EtherCAT Terminal and also features a sampling rate of
10,000 sps, internal switchable supplementary resistors and an integrated, parameterizable bridge supply.
It has the same technological features as the ELM3x0x Terminals, i.e. all parameters can be set via
EtherCAT using the CoE directory.
The EPP3504-0023 is designed for use close to the measurement site in a protected environment and is
therefore equipped with IP20 bridge connections.
Quick-Links
• IO configuration in TwinCAT
• Mounting and wiring [} 203]
• Process data overview [} 59]
• Connection view [} 59]
• Object description and parameterization [} 60]
EPP3504-0023
NOTE
Version: 1.2
Product overview
15