Sample Programs; Fig. 24 Opening The *. Tnzip Archive; Fig. 25 Search Of The Existing Hw Configuration For The Ethercat Configuration Of The Example - Beckhoff EPP3504-0023 Short Manual

Commissioning
4.3

Sample programs

Using the sample programs
This document contains sample applications of our products for certain areas of application. The
application notes provided here are based on typical features of our products and only serve as
examples. The notes contained in this document explicitly do not refer to specific applications. The
customer is therefore responsible for assessing and deciding whether the product is suitable for a
particular application. We accept no responsibility for the completeness and correctness of the
source code contained in this document. We reserve the right to modify the content of this
document at any time and accept no responsibility for errors and missing information.
Preparations for starting the sample programs (tnzip file / TwinCAT 3)
• Click on the download button to save the Zip archive locally on your hard disk, then unzip the *.tnzip
archive file in a temporary folder.
Fig. 24: Opening the *. tnzip archive
• Select the .tnzip file (sample program).
• A further selection window opens. Select the destination directory for storing the project.
• For a description of the general PLC commissioning procedure and starting the program please refer to
the terminal documentation or the EtherCAT system documentation.
• The EtherCAT device of the example should usually be declared your present system. After selection
of the EtherCAT device in the "Solutionexplorer" select the "Adapter" tab and click on "Search...":
Fig. 25: Search of the existing HW configuration for the EtherCAT configuration of the example
84 Version: 1.2 EPP3504-0023