Fig. 22 Calling The Ads Monitor Command Test; Fig. 23 Activation Of "Ethercat Addr - Beckhoff EPP3504-0023 Short Manual

Fig. 22: Calling the ADS Monitor Command Test
In order to access the CoE of the EtherCAT box module, "EtherCAT address" must be activated, after which
TwinCAT must be activated or restarted.
Fig. 23: Activation of "EtherCAT Addr."
The following is to be entered in the dialog:
• A: Ams Net ID of the EtherCAT master
• B: as port, the EtherCAT address of the 'Slave'
EPP3504-0023 Version: 1.2
Commissioning
63