Table of Contents
Advertisement
Commissioning on EtherCAT Master
Fig. 96: Overview of network interfaces
Interfaces listed under "Compatible devices" can be assigned a driver via the "Install" button. A driver should
only be installed on compatible devices.
A Windows warning regarding the unsigned driver can be ignored.
Alternatively an EtherCAT-device can be inserted first of all as described in chapter Offline configuration
creation, section "Creating the EtherCAT device" [} 164] in order to view the compatible ethernet ports via its
EtherCAT properties (tab "Adapter", button "Compatible Devices..."):
Fig. 97: EtherCAT device properties (TwinCAT 2): click on "Compatible Devices..." of tab "Adapter"
TwinCAT 3: the properties of the EtherCAT device can be opened by double click on "Device .. (EtherCAT)"
within the Solution Explorer under "I/O":
After the installation the driver appears activated in the Windows overview for the network interface
(Windows Start → System Properties → Network)
EPP3504-0023
Version: 1.2
155
Advertisement
Chapters
Table of Contents
