Table of Contents
Advertisement
3
Product overview
3.1
Introduction
EtherCAT P
input
2 x 3-axis accelerometers
The EPP3752-0000 EtherCAT P Box has two internal 3-axis accelerometers with 10 bits and a selectable
measuring range of ±2 g, ±4 g, ±8 g and ±16 g. The sampling frequency is 1 Hz to 5 kHz. Possible
applications include the recording of vibrations and shocks/oscillations, and furthermore inclination
measurements in all three axes. Since measurement is carried out with two sensors that are positioned at an
angle of 90° to each other, the control system can check measured data for plausibility. Extended integrated
filter functions allow measured data to be pre-processed and appropriately scaled in order to filter
disturbances and to relieve the workload of the control system.
EPP3752-0000
EtherCAT P
downstream connection
Version: 1.2
Product overview
1 |
Tx+ / GND
S
2 |
Rx+ / GND
P
3 |
Rx- / U
P
4 |
Tx- / U
S
9
Advertisement
Table of Contents
