Ethercat Subscriber Configuration - Beckhoff EPP3504-0023 Short Manual

Commissioning on EtherCAT Master
Fig. 140: TwinCAT 2 Dialog Change to Alternative Type
If called, the System Manager searches in the procured device ESI (in this example: EL1202-0000) for
details of compatible devices contained there. The configuration is changed and the ESI-EEPROM is
overwritten at the same time – therefore this process is possible only in the online state (ConfigMode).
6.3.7

EtherCAT subscriber configuration

In the left-hand window of the TwinCAT 2 System Manager or the Solution Explorer of the TwinCAT 3
Development Environment respectively, click on the element of the terminal within the tree you wish to
configure (in the example: EL3751 Terminal 3).
Fig. 141: Branch element as terminal EL3751
In the right-hand window of the TwinCAT System Manager (TwinCAT 2) or the Development Environment
(TwinCAT 3), various tabs are now available for configuring the terminal. And yet the dimension of
complexity of a subscriber determines which tabs are provided. Thus as illustrated in the example above the
terminal EL3751 provides many setup options and also a respective number of tabs are available. On the
contrary by the terminal EL1004 for example the tabs "General", "EtherCAT", "Process Data" and "Online"
are available only. Several terminals, as for instance the EL6695 provide special functions by a tab with its
own terminal name, so "EL6695" in this case. A specific tab "Settings" by terminals with a wide range of
setup options will be provided also (e.g. EL3751).
"General" tab
Fig. 142: "General" tab
EPP3504-0023 Version: 1.2 177