Replacing the Laser
Replacing the Detector
Replacing the Electronics Module
Thermo Scientific
Type the serial number for the new source (recorded in step 8), enter today's date and
click Save.
15. Make sure the system has been on for at least 15 minutes (one to six hours for best
results), and then align the instrument (see
16. Run the
Performance Verification
17. Replace any accessories you removed earlier.
18. If the system is purged, reconnect the purge lines.
Related Topics
•
Installing a Purge Kit
•
Setting Purge Gas Controls
The laser in your instrument is not user-replaceable. If you suspect there is a problem with the
laser,
contact us
for assistance.
Related Topics
•
Troubleshooting
The detector in your instrument is not user-replaceable. If you suspect there is a problem with
the detector,
contact us
for assistance.
Related Topics
•
Troubleshooting
The electronics module in your instrument is not user-replaceable. If you suspect there is a
problem with the electronics module,
Related Topics
•
Troubleshooting
Aligning Your
Spectrometer).
(PV) test.
contact us
for assistance.
Nicolet iS5N Spectrometer User Guide
3
Maintenance
Installing or Replacing Hardware
49