Thermo Scientific iS5N Series User Manual page 16

2
Operation
Installing an Accessory
iD Foundation Adapter
12 Nicolet iS5N Spectrometer User Guide
Here is the iD Base Adapter and attached slide mount with a card holder installed in the
spectrometer.
The iD Foundation adapter fits our Foundation Series Swap-Top Modules. For information
about these modules, see the Foundation Series User Guide in your documentation set.
To install the adapter, remove any accessory from the spectrometer and place the adapter over
the pins on the spectrometer baseplate. Magnets hold the adapter in the proper position.
Insert attenuation screen here
Tighten screws to secure the Foundation accessory
Remove screws and panel for use with a diffuse reflectance accessory
Thermo Scientific