7.4 Tandem operation/paper splitting (*optional)
7.4.1
Align the paper splitting unit
Fig. 42 Paper splitting unit
–
Loosen the paper splitting unit (1) by turning the clamping screw (2) to the left.
–
Move the paper splitting unit to the desired position (A) and secure by turning
the clamping screw to the right.
Fig. 41 Paper splitting unit
Operating instructions Interleaver
0043
When using a broad paper roll and upon
simultaneous cutting of two products, it is
necessary to split the paper in order to be
able to place it individually under each
product.
The paper splitting unit serves this purpose.
The paper is split between the paper control
unit/paper brake and the 90° deflection.
The alignment of the paper splitting unit in
the interleaver housing must take place in
the middle of the paper width.
Operation
43