Deposit 1St Slice; Paper Shortage - Weber CCI 303 Operating Instructions Manual

7.1.2.4 Deposit 1st slice

The deposit of the slices on the portioning belt is influenced by the insertion of a paper layer.
If cutting takes place with the deselected parameter "WITH SUB-SHEET," then the position
of the first slice of a portion on the portioning belt must be corrected.
Scroll with keys [ ] and [
DEPOSIT 1ST SLICE
A value from 0 - 360 can be entered.

7.1.2.5 Paper shortage

If a fault of the interleaver occurs, the control display shows the following message:
Paper shortage
Paper jam
Error cutting edge
Cutting operation stops. Eliminate the cause of the fault and/or insert a new paper roll. See
chapter "Setting up the interleaver with paper."
To resume cutting operation, press button I on the cutting head housing.
] until the following message appears:
Operating instructions Interleaver
0022
Operation
22