Carrying Out A Run At Creep Speed/Final Inspection Of The Paper Course - Weber CCI 303 Operating Instructions Manual

7.2.2.12

Carrying out a run at creep speed/final inspection of the paper course

Fig. 32 Creep run
– Push the interleaver unit (1) into the interleaver housing until the locking bolt (2)
engages.
– Keep the button (3) pressed for the duration of the creep run.
Operating instructions Interleaver
0037
In order to guide the newly inserted paper
up to the cutting area and to check the
paper course during ongoing operation, the
paper transport can be initiated manually
by starting the creep run.
Operation
37