Guiding The Paper Via Transport Roller; Guiding The Paper Through The Loop Channel - Weber CCI 303 Operating Instructions Manual

7.2.2.2 Guiding the paper via transport roller

Fig. 13 Paper course
– Lift the pressing roller (1) and place the paper (2) around the transport roller of the paper
guide in accordance with the illustration (3)
NOTE
When inserting and threading the paper, ensure that it is not twisted or
compressed in any place!

7.2.2.3 Guiding the paper through the loop channel.

Fig. 14 Loop channel
– Guide the paper (1) in the loop channel down to the floor grid and up to the paper control
unit/paper brake (2).
Operating instructions Interleaver
0026
Pull the paper off the roll and carefully
guide it round the individual pressure,
deflection and transport rollers.
These rollers serve for continuous and safe
guidance of the paper during the entire
cutting operation.
The loop channel serves as a paper
reservoir to ensure continuous paper feed at
high cutting speeds
Operation
26